• Angled front mount data strip for use on lower shelves
• Back surface is clear, front surface is clear
• Length: 1200mm
• Height: 26mm (will hold labels up to 26mm high)
• 100% clear scannable front
• UV resistant to eliminate discolouring
• Superior plastic "memory" to maintain tight closure of the front surface
• High quality German adhesive tape adheres powerfully initially, and this bonding increases over the next 72 hours
• The PVC material in this data strip includes Impact Modifiers that work to stop the data strip becoming brittle over time and thereby increasing it's life expectancy.
   

This type of data strip features an angled adhesive tape mounting section. The tape itself is a thin foam tape that gives very strong adhesion. Usually used, but not exclusively, on lower shelves of gondolas and racking in order to present a better viewing angle for the customer. This data strip adheres to the front edge of a steel or wooden shelf.

To display, and be able to change quickly, labels on a shelf, our data strip is ideal. It bonds strongly to the shelf edge and has a very high life expectancy. Using data strip eliminates the need to apply (and later scrape off) labels directly to a shelf edge saving time and money.

The materials - hardeners, plasticisers etc - used in the production of our data strips ensure that they are not susceptible to damage due to contact from, for example, shopping trolleys. As well, the formula used in the PVC gives the plastic the essential "memory" it needs to perform on a day to day basis. This means when you pull the front surface open to remove or insert a label, it snaps back tightly...a feature not found on inferior quality data strips.