• Adhesively attached rail & riser for the Shelf Management System
• Overall Length: 914MM
• 25MM Adhesive Strip
• 30MM Front Riser
• Colour: Clear
• Used on steel, glass, plastic or wooden shelves
• Shelf dividers snap onto the 'T-Bar' behind the riser

A rail / riser has 2 functions - to provide a fixture point for shelf dividers to attach to, as well as to provide a small barrier to stop stock falling foward and off the shelf.

To set up a shelf management system, you will need two rails - one on the front of a shelf and one on the rear. Shop the rear rail here .

When setting up a system using a adhesive rail / riser:
1. Lay down the front rail (or rail / riser)
2. Lay down the rear rail
3. Snap on shelf dividers to both the front and rear rail.
4. Adjust the position of the dividers by sliding them along the rails.

The adhesive rail / riser is a great way to keep products organised and the 39mm high riser will also act as a barrier to stop items from falling off the front of a shelf. It will keep stock organised and easy to see and re-stocking is much quicker.

Watch the 2 minute shelf management tutorial here!